LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Tundra Base, 4.0 U >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> VSC Off Switch >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

VSC Off Switch: Removal

  1. REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab)  (See REMOVAL )
  2. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab, CrewMax)  (See )
  3. REMOVE COWL SIDE TRIM BOARD LH  (See REMOVAL )
  4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH  (See REMOVAL )
  5. REMOVE VSC OFF SWITCH 
    1. Disconnect the VSC OFF switch connector.
    2. Using a screwdriver, detach the 2 claws and remove the VSC OFF switch from the lower instrument panel finish panel LH.
      Fig 1: Detaching Claws Using Screwdriver
      G05159879Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals