LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Yaris Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Audio System & Visual System) >> Network Gateway Ecu >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Network Gateway Ecu: Installation

WARNING: This page is about a different car, the 2009 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL NETWORK GATEWAY ECU 
    1. Install the network gateway ECU with the bolt.
    2. Connect the connector.
  2. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY 
    1. Install the instrument panel (See INSTALLATION ) .
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    Fig 1: Locating Network Gateway ECU Bolt
    G05189941Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals