LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Yaris Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Engine Control System) >> Crankshaft Position Sensor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor: Inspection

WARNING: This page is about a different car, the 2009 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT CRANKSHAFT POSITION SENSOR 
    1. Measure the resistance of the sensor.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION

      Tester Connection Condition Specified Condition
      1 - 2 Cold 985 to 1,600 Ω
      1 - 2 Hot 1,265 to 1,890 Ω
      Fig 1: Identifying Sensor Connector Terminal
      G05188993Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE: The terms "Cold" and "Hot" refer to the temperature of the sensor. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100C (122 to 212°F).

      If the result is not as specified, replace the crankshaft position sensor.

scientia non olet · About LEMON Manuals