Back Power Window Switch: Inspection: Inspection
- INSPECT BACK DOOR POWER WINDOW REGULATOR SWITCH ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard Resistance
Tester Connection Switch Condition Specified Condition 6 (UP) - 1 (E) Manual up operation Below 1 Ω 7 (DOWN) - 1 (E) Manual down operation Below 1 Ω 8 (AUTO) - 1 (GND) Auto up/down operation Below 1 Ω 6 (UP) - 1 (E) Not operated 10 kΩ or higher 7 (DOWN) - 1 (E) Not operated 10 kΩ or higher 8 (AUTO) - 1 (GND) Not operated 10 kΩ or higher - If the result is not as specified, replace the back door power window regulator switch assembly.
TEXT IN ILLUSTRATION*a Component without harness connected
(Back Door Power Window Regulator Switch Assembly)
- Measure the resistance according to the value(s) in the table below.