| Starter assembly |
- |
| Specified current |
90 A or less at 11.5 V |
| Starter relay |
- |
| Specified condition |
3 - 5 |
10 kΩ or higher |
| 3 - 5 |
Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
| Engine switch |
- |
| Specified condition |
7 - 5 |
10 kΩ or higher (Engine switch OFF) |
| 2 - 5 |
10 kΩ or higher (Engine switch OFF) |
| 7 - 5 |
Below 1 Ω (Engine switch ON) |
| 2 - 5 |
Below 1 Ω (Engine switch ON) |
| Ignition or starter switch assembly |
- |
| Specified condition |
- |
10 kΩ or higher (Switch condition LOCK) |
| 1 - 3 |
Below 1 Ω (Switch condition ACC) |
| 1 - 2 |
Below 1 Ω (Switch condition ON) |
| 1 - 3 |
Below 1 Ω (Switch condition ON) |
| 5 - 6 |
Below 1 Ω (Switch condition ON) |
| 1 - 2 |
Below 1 Ω (Switch condition START) |
| 4 - 5 |
Below 1 Ω (Switch condition START) |
| 5 - 6 |
Below 1 Ω (Switch condition START) |
| Starter assembly |
- |
| Starter armature assembly |
- |
| Commutator depth |
Standard |
3.1 mm (0.122 in.) |
| Maximum |
3.8 mm (0.150 in.) |
| Resistance (between the segments) |
Standard |
below 1 Ω |
| Resistance (between the commutator and armature coil core) |
Standard |
10 kΩ or higher |
| Starter commutator end frame assembly |
- |
| Brush length |
Standard |
9.0 mm (0.354 in.) |
| Minimum |
4.0 mm (0.158 in.) |
| Resistance |
Standard |
10 kΩ or higher |
| Repair starter armature assembly |
- |
- |
| Snap ring length |
Maximum |
5.0 mm (0.197 in.) |
| Service starter kit |
- |
- |
| Resistance (between terminals 50 and C) |
Standard |
below 1 Ω |
| Resistance (between terminals 50 and swich body) |
Standard |
below 2 Ω |