LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> Land Cruiser >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Information) >> Ignition Coil And Spark Plug >> Removal >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Ignition Coil And Spark Plug: Removal: Removal

  1. REMOVE NO. 2 ENGINE UNDER COVER  . Refer to REMOVAL - Step 4
  2. REMOVE V-BANK COVER SUB-ASSEMBLY  . Refer to REMOVAL - Step 22
  3. REMOVE AIR CLEANER HOSE ASSEMBLY  . Refer to REMOVAL - Step 8
  4. REMOVE AIR CLEANER ASSEMBLY  . Refer to REMOVAL - Step 24
  5. DISCONNECT WATER BY-PASS PIPE ASSEMBLY 
    1. Remove the 2 bolts and disconnect the water by-pass pipe from the cylinder head cover and timing chain cover.
      Fig 1: Locating Water Bypass Pipe
      GTY142597Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 3 bolts and disconnect the water by-pass pipe from the cylinder head cover.
      Fig 2: Locating Water Bypass Pipe With Bolts
      GTY148589Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE IGNITION COIL ASSEMBLY 
    1. Disconnect the 8 ignition coil connectors.
      Fig 3: Locating Ignition Coil Connectors With Bolts
      GTY139203Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 8 bolts and 8 ignition coils.
  7. REMOVE SPARK PLUG 
    1. Remove the 8 spark plugs.
scientia non olet · About LEMON Manuals