LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> Land Cruiser >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Brake Control / Dynamic Control Systems (Service Information) >> Steering Angle Sensor >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Angle Sensor: Installation: Installation

  1. INSTALL STEERING ANGLE SENSOR 
    1. Align the installation holes on the steering sensor with the pins on the spiral cable.
      Fig 1: Identifying Steering Angle Sensor Claws
      GTY141696Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Attach the 6 claws and install the steering sensor to the spiral cable.
  2. INSTALL SPIRAL CABLE SUB-ASSEMBLY  . Refer to INSTALLATION - Step 1
  3. INSTALL UPPER STEERING COLUMN COVER  . Refer to INSTALLATION - Step 21
  4. INSTALL LOWER STEERING COLUMN COVER  . Refer to INSTALLATION - Step 22
  5. ADJUST SPIRAL CABLE  . Refer to INSTALLATION - Step 4
  6. INSTALL STEERING WHEEL ASSEMBLY  . Refer to REMOVAL - Step 8
  7. INSTALL STEERING PAD  . Refer to INSTALLATION - Step 5
  8. INSTALL LOWER NO. 2 STEERING WHEEL COVER  . Refer to INSTALLATION - Step 3
  9. INSTALL LOWER NO. 3 STEERING WHEEL COVER  . Refer to INSTALLATION - Step 2
  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:
    • Reset the Autoaway/Return function setting to the previous condition by changing the customize parameter. Refer to CUSTOMIZE PARAMETERS .
  11. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light. Refer to DIAGNOSIS SYSTEM .
scientia non olet · About LEMON Manuals