Operation Check

1. Check that the passenger side power window and rear windows cannot be operated when the window lock switch of the power window master switch is pressed.
   Fig 1: Identifying Power Window Master Switch

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Check that the passenger side power window and rear windows can be operated when the window lock switch is pressed again.

1. Check that the driver side power window operates as follows:
   OK:
   
   

   Condition	Master Switch	Switch Operation	Power Window
   Ignition switch ON	Driver side	Pulled up	UP (closes)
   Ignition switch ON	Driver side	Pushed halfway down	DOWN (opens)

2. Check that the passenger side power window operates as follows:
   OK:
   
   

   Condition	Regulator Switch	Switch Operation	Power Window
   Ignition switch ON Window lock switch OFF	Passenger side	Pulled up	UP (closes)
   Ignition switch ON Window lock switch OFF	Passenger side	Pushed down	DOWN (opens)

3. Check that the rear LH power window operates as follows:
   OK:
   
   

   Condition	Regulator Switch	Switch Operation	Power Window
   Ignition switch ON Window lock switch OFF	Rear LH	Pulled up	UP (closes)
   Ignition switch ON Window lock switch OFF	Rear LH	Pushed down	DOWN (opens)

4. Check that the rear RH power window operates as follows:
   OK:
   
   

   Condition	Regulator Switch	Switch Operation	Power Window
   Ignition switch ON Window lock switch OFF	Rear RH	Pulled up	UP (closes)
   Ignition switch ON Window lock switch OFF	Rear RH	Pushed down	DOWN (opens)

1. Check that the driver side power window operates as follows:
   OK:
   
   

   Condition	Master Switch	Switch Operation	Power Window
   Ignition switch ON	Driver side	Fully pushed down	AUTO DOWN (fully opens)

1. Check that the passenger side power window operates as follows:
   OK:
   
   

   Condition	Master Switch	Switch Operation	Power Window
   Ignition switch ON Window lock switch OFF	Passenger side	Pulled up	UP (closes)
   Ignition switch ON Window lock switch OFF	Passenger side	Pushed down	DOWN (opens)

2. Check that the rear LH power window operates as follows:
   OK:
   
   

   Condition	Master Switch	Switch Operation	Power Window
   Ignition switch ON Window lock switch OFF	Rear LH	Pulled up	UP (closes)
   Ignition switch ON Window lock switch OFF	Rear LH	Pushed down	DOWN (opens)

3. Check that the rear RH power window operates as follows:
   OK:
   
   

   Condition	Master Switch	Switch Operation	Power Window
   Ignition switch ON Window lock switch OFF	Rear RH	Pulled up	UP (closes)
   Ignition switch ON Window lock switch OFF	Rear RH	Pushed down	DOWN (opens)

1. Check that all the power windows can be operated with the power window master switch after the ignition switch is turned off.
2. Check that the key-off operation function does not operate after the driver or passenger side door is opened.
3. Check that all the power windows cannot be operated after more than approximately 45 seconds elapse after the ignition switch is turned off.

HINT: 

PTC operation is a function that prevents overloading of the power window regulator by stopping the motor. PTC operation activates when the power window switch is operated for a predetermined amount of time.

1. Pull up and hold the power window switch for more than 90 seconds. Then release the switch.
2. Check that pressing the switch does not move the window.
3. Wait until 60 seconds have passed since the switch was released in the first step. Check that pressing the switch results in normal window movement.