LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> Matrix S, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2AZ-FE) (Service Information) >> Air Fuel Ratio Sensor >> Removal >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Air Fuel Ratio Sensor: Removal: Removal

  1. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR 
    1. Remove the 4 bolts and the No. 1 exhaust manifold heat insulator.
      Fig 1: Locating Exhaust Manifold Heat Insulator Bolts
      GTY160869Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE AIR FUEL RATIO SENSOR 
    1. Disconnect the air fuel ratio sensor connector and wire harness clamp.
      Fig 2: Locating Air Fuel Ratio Sensor Connector And Wire Harness Clamp
      GTY194550Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using SST, remove the air fuel ratio sensor.
      • SST: 09224-00010 
      Fig 3: Identifying Air Fuel Ratio Sensor
      GTY193820Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals