Camshaft Oil Control Valve: Inspection: Inspection

INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
1. Resistance inspection
  1. Using an ohmmeter, measure the resistance between the terminals.
    Resistance
    
    6.9 to 7.9 Ω at 20°C (68°F)
    
    If necessary, replace the camshaft timing oil control valve assembly.
2. Movement inspection
  
  Fig 1: Inspecting Camshaft Timing Oil Control Valve Assembly For Movement
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  1. Connect the positive (+) lead from the battery to terminal 1 and connect the negative (-) lead to terminal 2, and check the movement of the valve.
    NOTE:
    Confirm that the valve moves freely and does not stick in any position.
    
    If necessary, replace the camshaft timing oil control valve assembly.
    
    HINT:
    
    Accumulation of foreign objects causes subtle pressure leaks. The subtle pressure leaks will cause the cam to advance, and this will cause a DTC to be set.