Engine Coolant Temperature Sensor: Removal: Removal

DISCHARGE FUEL SYSTEM PRESSURE
Refer to PRECAUTION
DRAIN ENGINE COOLANT . Refer to REPLACEMENT - Step 1
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE V-BANK COVER See step 3
REMOVE AIR CLEANER ASSEMBLY See step 4
REMOVE INTAKE AIR SURGE TANK . Refer to REMOVAL - Step 6
DISCONNECT FUEL PIPE SUB-ASSEMBLY NO. 2 . Refer to REMOVAL - Step 8
REMOVE ENGINE COOLANT TEMPERATURE SENSOR

Fig 1: Identifying Engine Coolant Temperature Sensor Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Disconnect the connector.
2. Using a 19 mm deep socket wrench, remove the water temperature sensor and gasket.