LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2011 >> Matrix Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel System (2ZR-FE) (Service Information) >> Fuel Pressure Regulator >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fuel Pressure Regulator: Installation: Installation

  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY 
    1. Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.
      Fig 1: View Of Fuel Pressure Regulator Assembly O-Rings
      GTY193016Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the fuel pressure regulator assembly.
      Fig 2: Locating Fuel Pressure Regulator Assembly
      GTY167675Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FUEL PUMP  See step  1
  3. INSTALL FUEL SENDER GAUGE ASSEMBLY  See step  1
  4. INSTALL FUEL SUCTION TUBE ASSEMBLY 
    1. Install the fuel suction tube assembly to the fuel tank assembly. Refer to INSTALLATION .
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  6. INSPECT FOR FUEL LEAK  . Refer to ON-VEHICLE INSPECTION - Step 1
scientia non olet · About LEMON Manuals