Steering Column Assembly: Reassembly: Reassembly

INSTALL KEY INTERLOCK SOLENOID WIRE (w/o Smart Key System)
1. Install the key interlock solenoid wire on to the install the ignition switch.
INSTALL IGNITION SWITCH ASSEMBLY (w/o Smart Key System)
1. Install the ignition switch onto the steering column upper bracket with the 2 screws.
  
  Fig 1: Identifying Ignition Switch Assembly Screws (W/O Smart Key System)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL KEY INTERLOCK SOLENOID (w/o Smart Key System)
1. Install the key interlock solenoid onto the steering column upper bracket with the 2 screws.
  
  Fig 2: Identifying Key Interlock Solenoid Screws (W/O Smart Key System)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the connector.
INSTALL UNLOCK WARNING SWITCH ASSEMBLY (w/o Smart Key System)
1. Attach the 2 claws to install the unlock warning switch onto the steering column upper bracket.
  
  Fig 3: Identifying Unlock Warning Switch Assembly Claws (W/O Smart Key System)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT:
  
  Slide the unlock warning switch in the direction shown by the arrow in the illustration to install it.
INSTALL IGNITION SWITCH LOCK CYLINDER ASSEMBLY (w/o Smart Key System)
1. Turn the ignition switch to ON (ACC).
2. Install the ignition switch lock cylinder into the steering column upper bracket.
  
  Fig 4: Installing Ignition Switch Lock Cylinder
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Make sure that the ignition switch lock cylinder is securely fixed onto the ignition switch lock cylinder.
INSPECT STEERING LOCK OPERATION (w/o Smart Key System)
1. Remove the key and check that the steering lock function is activated.
  
  Fig 5: Inspecting Steering Lock (1 Of 2)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Insert the key, turn the ignition switch ON (ACC) and check that the steering lock function is deactivated.
  
  Fig 6: Inspecting Steering Lock (2 Of 2)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

INSTALL STEERING LOCK ACTUATOR ASSEMBLY

Temporarily install the steering lock actuator assembly with a new tapered-head bolt.

Tighten the tapered-head bolt until the bolt head breaks off.

Fig 7: Tightening Tapered-Head Bolt Until Bolt Head Breaks Off

TEXT IN ILLUSTRATION

*A	w/o Smart Key System
*B	w/ Smart Key System