Installation

2AR-FE ENGINE CONTROL: IGNITION COIL AND SPARK PLUG: INSTALLATION

HINT
Perform "Inspection After Repair" after replacing the spark plug and ignition coil assembly Programming and Relearning.

1. INSTALL SPARK PLUG

(a) Using a spark plug wrench, install the 4 spark plugs.

Torque : 25 Nm (255 kgf-cm, 18 ft-lbf)

HINT
Perform "Inspection After Repair" after replacing the spark plug Programming and Relearning.

2. INSTALL IGNITION COIL ASSEMBLY

(a) Install the 4 ignition coil assemblies with the 4 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

HINT
Perform "Inspection After Repair" after replacing the ignition coil assembly Programming and Relearning.

(b) Connect the 4 ignition coil assembly connectors.

3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation