Crankshaft Position Sensor: Inspection: Inspection

INSPECT CRANKSHAFT POSITION SENSOR

Measure the resistance according to the value(s) in the table below.

Fig 1: Inspecting Crankshaft Position Sensor

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

TEXT IN ILLUSTRATION

*a	Component without harness connected: (Crankshaft Position Sensor)

Standard Resistance

Tester Connection	Condition	Specified Condition
1 - 2	Cold	1630 to 2740 Ω
1 - 2	Hot	2065 to 3225 Ω

NOTE:

In the table above, the terms "Cold" and "Hot" refer to the temperature of the sensor. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

If the resistance is not as specified, replace the sensor.