LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2012 >> Prius Two >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel System (Except Plug-In) (Service Information) >> Fuel Pump >> Inspection >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump: Inspection: Inspection

  1. INSPECT FUEL PUMP 
    1. Check the resistance.
      Fig 1: Connecting Battery Positive (+) Lead To Terminal 2 Of Connector, And Negative (-) Lead To Terminal 1
      GTY194826Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using an ohmmeter, measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection Condition Specified Condition
        1 - 2 20°C (68°F) 0.2 to 3.0 Ω

        If the result is not as specified, replace the fuel pump.

    2. Check fuel pump operation.
      1. Apply battery voltage between terminals 1 and 2. Check that the pump operates.
        NOTE:
        • These tests must be done quickly (within 10 seconds) to prevent the coil from burning out.
        • Keep the fuel pump as far away from the battery as possible.
        • Always switch the voltage on and off on the battery side, not the fuel pump side.

        If the pump does not operate, replace the fuel pump.

scientia non olet · About LEMON Manuals