SFI System: Precaution: Precaution
- INITIALIZATION NOTE:
- If the ECM is replaced, register the ECU communication ID for Engine Immobiliser System. Refer to REGISTRATION .
- Perform Registration (VIN registration) when replacing the ECM. Refer to REGISTRATION .
- Perform initialization (throttle position) after replacing the throttle body assembly or cleaning any throttle body components. Refer to INSTALLATION - Step 13 .
- Perform initialization (throttle position) after reconnecting the battery cable or replacing the ECM. Refer to INSTALLATION - Step 13 .
HINT:
Initialization cannot be completed by only disconnecting and reconnecting the cable of the negative (-) battery terminal.
- WHEN USING TECHSTREAM WARNING:
Observe the following items for safety reasons:
- Before using the Techstream, read the instruction manual.
- Prevent the Techstream cable from being caught on the pedals, shift lever or steering wheel when driving with the Techstream connected to the vehicle.
- When driving the vehicle for testing purposes using the Techstream, 2 persons are required. One is for driving the vehicle, and the other operates the Techstream.