Removal

HEATING / AIR CONDITIONING: AIR CONDITIONING AMPLIFIER: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and the LH side Removal.

3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

HINT
Use the same procedure for the RH side and the LH side Removal.

4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

5. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Removal

6. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY

(a) Disconnect each connector.





(b) Remove the 2 screws and air conditioning amplifier assembly.

NOTICE:
Be careful when removing the air conditioning amplifier assembly. If the air conditioning amplifier assembly is dropped, replace it with a new one.