Removal

1AR-FE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER

2. REMOVE NO. 2 ENGINE UNDER COVER

3. REMOVE WINDSHIELD WIPER MOTOR AND LINK

(a) Remove the windshield wiper motor and link Removal.

4. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Removal

5. DRAIN ENGINE COOLANT Service and Repair

6. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

7. REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY Removal

8. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

9. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY Removal

10. REMOVE AIR CLEANER CASE Removal

11. REMOVE ENGINE COOLANT TEMPERATURE SENSOR

(a) Disconnect the engine coolant temperature sensor connector.





Text in Illustration





(b) Remove the engine coolant temperature sensor and gasket.