LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2013 >> 4Runner Trail >> Repair and Diagnosis >> Electrical >> Starter >> Starting System (Service Information) >> Ignition Switch >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Switch: Installation: Installation

  1. INSTALL IGNITION SWITCH ASSEMBLY 
    1. Attach the claw to connect the key interlock solenoid wire harness to the ignition switch.
    2. Install the ignition switch with the 2 screws.
    3. Connect the ignition switch connector and key interlock solenoid connector and attach the wire harness clamp.
  2. INSTALL LOWER STEERING COLUMN COVER  See step  3
scientia non olet · About LEMON Manuals