Removal And Installation: Installation: Installation
- INSTALL SPARK PLUG
- Install the 6 spark plugs to the cylinder head sub-assembly.
Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf)
- Install the 6 spark plugs to the cylinder head sub-assembly.
- INSTALL IGNITION COIL ASSEMBLY
- Install the 6 ignition coil assemblies to the cylinder head cover sub-assembly with the 6 bolts.
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
- Connect the 6 ignition coil assembly connectors.
- Install the 6 ignition coil assemblies to the cylinder head cover sub-assembly with the 6 bolts.
- INSTALL NO. 2 EMISSION CONTROL VALVE SET (w/ Secondary Air Injection System)
Refer to INSTALLATION
- INSTALL EMISSION CONTROL VALVE SET (w/ Secondary Air Injection System)
Refer to INSTALLATION