Integration Relay: Removal: Removal

SEPARATE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY . Refer to REMOVAL - Step 32
REMOVE RESERVOIR BRACKET . Refer to REMOVAL - Step 33
REMOVE NO. 1 RELAY BLOCK COVER
1. Remove the No. 1 relay block cover.
  
  Fig 1: Identifying No. 1 Relay Block Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ENGINE ROOM JUNCTION BLOCK ASSEMBLY
1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the engine room junction block assembly.
  
  Fig 2: Disengaging Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the 4 connectors.
  
  Fig 3: Identifying Engine Room Junction Block Assembly Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002