Accelerator Pedal: Installation: Installation

WARNING: This page is about a different car, the 2013 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL ACCELERATOR PEDAL ROD ASSEMBLY
NOTE:
- Avoid physical shocks to the accelerator pedal rod assembly.
- Do not disassemble the accelerator pedal rod assembly.
1. Install the accelerator pedal rod assembly with the 2 nuts.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
  
  NOTE:
  Do not apply oil or lubricant to the accelerator pedal rod assembly. If it is applied, the accelerator pedal rod assembly may not move smoothly.
2. Connect the accelerator pedal rod assembly connector.