Crankshaft Position Sensor: Inspection: Inspection
- INSPECT CRANKSHAFT POSITION SENSOR
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Check the resistance.
- Using an ohmmeter, measure the resistance between the terminals.
Standard
Tester Connection Specified Condition 1 (NE+) - 2 (NE-) 1, 30 to 2, 40 Ω at COLD 1 (NE+) - 2 (NE-) 2, 65 to 3, 25 Ω at HOT HINT:
Cold and Hot mean the temperature of the coils themselves. Cold is from -10 to 50°C (14 to 122°F) and Hot is from 50 to 100°C (122 to 212°F).
If the result is not as specified, replace the camshaft position sensor.
- Using an ohmmeter, measure the resistance between the terminals.
- Check the resistance.