VVT Sensor: Removal: Removal

WARNING: This page is about a different car, the 2013 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE NO. 2 EMISSION CONTROL VALVE SET
Refer to REMOVAL
REMOVE AIR CLEANER HOSE ASSEMBLY . Refer to REMOVAL - Step 4
REMOVE VVT SENSOR (for Intake Side of Bank 1)
1. Disconnect the VVT sensor connector.
  
  Fig 1: Identifying VVT Sensor (for Intake Side of Bank 1)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.
REMOVE VVT SENSOR (for Exhaust Side of Bank 1)
1. Disconnect the VVT sensor connector.
  
  Fig 2: Identifying VVT Sensor (For Exhaust Side Of Bank 1)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.
REMOVE VVT SENSOR (for Intake Side of Bank 2)
1. Disconnect the VVT sensor connector.
  
  Fig 3: Identifying VVT Sensor (For Intake Side Of Bank 2)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.
REMOVE VVT SENSOR (for Exhaust Side of Bank 2)
1. Disconnect the VVT sensor connector.
  
  Fig 4: Identifying VVT Sensor (For Exhaust Side Of Bank 2)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.