How To Proceed With Troubleshooting [12/2012 - ]: Procedure

Result: 

NEXT 

See step  2

Standard voltage

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

Result: 

NEXT 

See step  3

1. Use the Techstream to check if the CAN communication system is functioning normally.

   Refer to DIAGNOSIS SYSTEM [12/2012 - 11/2013] Refer to DIAGNOSIS SYSTEM [11/2013 - 10/2015] Refer to DIAGNOSIS SYSTEM [10/2015 - 08/2016] Refer to DIAGNOSIS SYSTEM [08/2016 - ]

Result: 

CAN DTC is output 

GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING). Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2012 - 10/2015]  ,  HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - ] 

Result: 

CAN DTC is not output 

See step  4

1. Check for DTCs.

   Refer to DTC CHECK / CLEAR [12/2012 - 10/2015] Refer to DTC CHECK / CLEAR [10/2015 - 08/2016] Refer to DTC CHECK / CLEAR [08/2016 - ] 

   Chassis > Four Wheel Drive > Trouble Codes 

2. Check for freeze frame data.

   HINT: 

   Record or print DTCs and freeze frame data if necessary.

3. Clear the DTCs and freeze frame data.

   Refer to DTC CHECK / CLEAR [12/2012 - 10/2015] Refer to DTC CHECK / CLEAR [10/2015 - 08/2016] Refer to DTC CHECK / CLEAR [08/2016 - ] 

   Chassis > Four Wheel Drive > Clear DTCs 

4. Recheck for DTCs.

   Refer to DTC CHECK / CLEAR [12/2012 - 10/2015] Refer to DTC CHECK / CLEAR [10/2015 - 08/2016] Refer to DTC CHECK / CLEAR [08/2016 - ] 

   Chassis > Four Wheel Drive > Trouble Codes 

Result: 

DTC does reoccur 

See step  7

Result: 

DTC does not reoccur 

See step  5

1. Refer to Problem Symptoms Table.

   Refer to PROBLEM SYMPTOMS TABLE [12/2012 - 10/2015] Refer to PROBLEM SYMPTOMS TABLE [10/2015 - 08/2016] Refer to PROBLEM SYMPTOMS TABLE [08/2016 - ] 

Result: 

Fault listed in problem symptoms table 

See step  7

Result: 

Fault not listed in problem symptoms table 

See step  6

1. Terminals of ECU.

   Refer to TERMINALS OF ECU [12/2012 - 08/2016] Refer to TERMINALS OF ECU [08/2016 - ] 

2. Data List / Active Test.

   Refer to DATA LIST / ACTIVE TEST [12/2012 - 10/2015] Refer to DATA LIST / ACTIVE TEST [10/2015 - 08/2016] Refer to DATA LIST / ACTIVE TEST [08/2016 - ] 

Result: 

NEXT 

See step  7

Result: 

NEXT 

See step  8

Result: 

NEXT 

END