DTC U3000-44: Control Module data memory failure: Procedure

VERIFY IF MALFUNCTIONING LOCATION IS POWER SOURCE CONTROL (POWER MANAGEMENT CONTROL ECU) DEPENDING ON REPEATABILITY
1. Clear the DTC for the power source control (power management control ECU) using the Techstream.
  Refer to DTC CHECK / CLEAR
  
  Body Electrical > Electric Supply Unit > Clear DTCs
2. Retrieve the power source control (power management control ECU) DTCs using the Techstream.
  Refer to DTC CHECK / CLEAR
  
  Body Electrical > Electric Supply Unit > Trouble Codes
3. Is the same DTC displayed?
Yes

See step 3

No

See step 2
VERIFY IF OTHER DTCS DISPLAYED
1. Are any other DTCs displayed?
No

DTC TROUBLESHOOTING COMPLETED.

Yes

REPAIR OR REPLACE THE MALFUNCTIONING PART ACCORDING TO THE APPLICABLE DTC TROUBLESHOOTING.
1. Refer to DIAGNOSTIC TROUBLE CODE CHART
REPLACE THE POWER SOURCE CONTROL (POWER MANAGEMENT CONTROL ECU).
1. Refer to REMOVAL
NEXT

See step 2