DTC P064D-00: Internal Control Module O2 Sensor Processor Performance - Bank 1: Procedure
- PURPOSE: PERFORM DTC INSPECTION AND VERIFY IF MALFUNCTIONING PART IS ECM
- Clear the DTC from the ECM memory using the Techstream.
Refer to CLEARING DTC
- Perform the KOER self test.
Refer to ON-DEMAND SELF-TEST/KEY-ON ENGINE RUNNING SELF-TEST
- Is the same DTC present?
Result
Result Yes No
Result: 2
Yes
See step 3
Result: 1
No
See step 2
- Clear the DTC from the ECM memory using the Techstream.
- PURPOSE: VERIFY IF THERE IS ANY OTHER MALFUNCTION
Result: 1
No
DTC TROUBLESHOOTING COMPLETED.
Result: 2
Yes
GO TO THE APPLICABLE DTC INSPECTION.
- Refer to DIAGNOSTIC TROUBLE CODE CHART
- REPLACE THE ECM.
- Refer to REMOVAL
- Then go to the next step.
Result
Proceed to NEXT
Result: 1
NEXT
See step 2