LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2019 >> 86 Base, Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Mass Air Flow Meter >> Removal [06/2016 - ] >> Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal [06/2016 - ]: Procedure

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 

    Refer to PROCEDURE - Step 1

  2. REMOVE MASS AIR FLOW METER 
    1. Disconnect the mass air flow meter connector.
      GTY389013Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws and the mass air flow meter.
scientia non olet · About LEMON Manuals