Caution / Notice / Hint

NOTE:

When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
If the forward recognition camera has been replaced with a new one, be sure to perform forward recognition camera adjustment.
HINT:

Forward recognition camera adjustment can be performed by using either "One Time Recognition" or "Sequential Recognition".

One Time Recognition:

Refer to ADJUSTMENT (ONE TIME RECOGNITION) [11/2018 - 02/2019] , or refer to ADJUSTMENT (ONE TIME RECOGNITION) [02/2019 - 12/2021]

Sequential Recognition:

Refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [11/2018 - 02/2019] , or refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [02/2019 - 12/2021]
for HV Model:
Before replacing the hybrid vehicle control ECU, refer to smart key system (for Start Function) Precaution.
for Gasoline Model:
Before replacing the ECM, refer to smart key system (for Start Function) Precaution.