DTC P060D: Internal Control Module Accelerator Pedal Position Performance [08/2015 - ]: Procedure

CHECK FOR DTC
1. Clear DTCs (Refer to DTC CHECK / CLEAR [08/2015 - 08/2019] , or refer to DTC CHECK / CLEAR [08/2019 - ] ).
2. Turn the ignition switch off.
3. Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
4. Connect the cable to the negative (-) battery terminal.
5. Turn the ignition switch to ON.
6. Check for DTCs.
  OK
  
  P060D is not output.
Result:

OK

CHECK FOR INTERMITTENT PROBLEMS

(Refer to CHECK FOR INTERMITTENT PROBLEMS [08/2015 - ] )

Result:

NG

REPLACE ECM

(Refer to REMOVAL [08/2015 - ] )