LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2021 >> Prius LE AWD-e >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System - Service Information >> Oil Level Sensor >> Installation [11/2015 -] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation [11/2015 -]: Procedure

  1. INSTALL ENGINE OIL LEVEL SENSOR 
    1. Install the engine oil level sensor with the 2 bolts.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

    2. Install a new clip to the engine oil level sensor.
    3. Connect the engine oil level sensor connector.
  2. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 4

  3. ADD ENGINE OIL 

    See step  5 [11/2015 - 12/2018], or See step  5 [12/2018 - 07/2020], or See step  5 [07/2020 - 06/2021], or See step  5

  4. CHECK ENGINE OIL LEVEL 

    Refer to PROCEDURE - Step 1

  5. INSPECT FOR OIL LEAK 

    See step  6 [11/2015 - 12/2018], or See step  6 [12/2018 - 07/2020], or See step  6 [07/2020 - 06/2021], or See step  6 [06/2021 -]

  6. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 72 [11/2015 - 08/2016] , or refer to PROCEDURE - Step 72 [08/2016 - 12/2018] , or refer to PROCEDURE - Step 72 [12/2018 - 07/2020] , or refer to PROCEDURE - Step 72 [07/2020 -]

scientia non olet · About LEMON Manuals