Multimedia Display Front Removal And Installation/Replacement

Mobile Repair Possible:  Van/Car

Removal Procedure: 

1. Remove instrument panel HMI trim cover. Refer to INSTRUMENT PANEL HMI TRIM COVER REMOVAL AND INSTALLATION/REPLACEMENT
2. Remove 2 bolts (1).

   Torque: 8 Nm 

3. Guide multimedia display away from the instrument panel in arrow direction.
4. Unlock and disconnect electrical connector (1).
5. Remove the multimedia display (2).

Installation Procedure: 

1. Installation is the reverse of removal procedure, noting the following.

   All fasteners must be tightened to torque specification! 

2. Install instrument panel HMI trim cover. Refer to INSTRUMENT PANEL HMI TRIM COVER REMOVAL AND INSTALLATION/REPLACEMENT