Wheel Alignment Specifications

NOTE: Prior to performing wheel alignment, perform preliminary visual and mechanical inspection of wheels, tires and suspension components. See PRE-ALIGNMENT INSTRUCTIONS in WHEEL ALIGNMENT THEORY/OPERATION article in the GENERAL INFORMATION section.

WHEEL ALIGNMENT SPECIFICATIONS

Application

Preferred

Range

Camber ⁽¹⁾

Front

-1 1/3

-1 To -1 2/3

Rear

-1 5/8

-1 1/2 To -1 3/4

Caster ⁽¹⁾

3 1/4

2 3/4 To 3 3/4

Toe-In ⁽²⁾

Front

1/16

0 To 1/8 (0 To 3.2)

Rear

1/4 (6.4)

1/8 To 3/8 (3.2 To 9.6)

Toe-In ⁽¹⁾

Front

1/8

0 To 1/4

Rear

1/2

1/4 To 3/4

Toe-Out On Turns ⁽¹⁾

1 1/2

1 1/4 To 1 3/4

⁽¹⁾	Measurement is in degrees.

⁽²⁾	Measurement is in inches (mm).