LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1993 >> Passat GL, 2.0 C, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - VR6 >> Ignition System >> Ignition Coil
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil

  1. Connect multimeter between terminals No. 1 and 15 of ignition coil. See Fig 1 .
  2. Fig 1: Testing Ignition Coil
    G00286389Courtesy of VOLKSWAGEN UNITED STATES, INC.
    CAUTION: DO NOT handle or cause the test connections to become disconnected during the following step.
  3. Turn ignition switch on. Voltage reading should be 2 volts minimum and then drop to zero volts after one to 2 seconds.
  4. Turn ignition switch to start position. LED tester must flicker while cranking. If not as specified, replace ignition coil.