Climatronic Control Module -J255- Coding (Function 07)

Climatronic Control Module -J255-, Coding (Scan Tool Function 07)

Coding For vehicles
00032 Market version: USA/CDN
Glass: tinted
Engine: VR6

- After entering code, press -Q- button to confirm input.

Indicated on display after entering code

->
Coding 00001 WSC XXXXX


NOTE:
- Previously published coding 00000 must NOT be entered.
- Improper coding results in incorrect blower output.
- The ignition must be switched off in order for the desired coding to be loaded into the control module. Always "End Output" (function 06) after coding control module and switch ignition off before proceeding with any additional VAG 1551 tests.


- Press -> button.

Indicated on display (function selection):


Rapid data transfer HELP
Select function XX


- End output (function 06) End Output (Function 06)
- Switch off ignition.
- Disconnect VAG 1551 Scan Tool (ST) from Data Link Connector (DLC).