Vehicle Positioning System Control Module
The Vehicle Positioning System Control Module -J895- is located behind the left luggage compartment side trim.
Removing
-- Turn off the ignition and all electrical consumers and remove the ignition key.
-- Remove the luggage compartment left trim panel, refer to Removal and Installation .
-- Remove the screws -3 and 4- and remove the Vehicle Positioning System Control Module -J895- -1- from the bracket -2-.
-- Release and disconnect the connectors from the Vehicle Positioning System Control Module -J895- -1-.
Installing
Install in reverse order of removal.
Torque Specifications:
- Screw -3- : 2.5 Nm
- Bolt -4- : 4 Nm