TPMS Reset Procedures: Notes
NOTE:
Some vehicles may be equipped with an Indirect TPM System. Although the Indirect system does not use tire pressure sensors installed on the 4 wheels, the reset procedure under Basic Setting is the same for Direct and Indirect TPM systems.
NOTE:
- Whenever a wheel is changed or replaced, the tires rotated, or whenever vehicle has been loaded, the TPM system needs to be reset. If a wheel is changed or replaced, or the tires rotated, see Basic Setting .
- If wheels are changed and replaced with manufacturer-approved wheel/tire combinations (i.e., from summer to winter tires) or if tire pressure deviates from pressures given on fuel filler flap, see After Wheel Or Pressure Change .
- If vehicle is equipped with unapproved tires or tires with pressures other than those listed on fuel filler flap (a 2nd wheel set), see Wheel Sets With Different Pressure Specifications .