Work Procedure

-- Connect the scan tool.

-- Start the engine and let run at idle speed.

-- Select Mode 6: Check test the results of components that are not continuously monitored.

Select the desired Test-ID..

The current minimum and maximum values will be displayed on the scan tool screen.

The following table is a numerical list of all "Test-IDs" that may be selected.

Monitor-ID	Component or System
$01:Monitor-ID $01: Oxygen Sensor Monitor Bank 1 - Sensor 1	Oxygen Sensor Monitor Bank 1 - Sensor 1 (Plausibility check)
$02:Monitor-ID $02: Oxygen Sensor Monitor Bank 1- Sensor 2	Oxygen Sensor Monitor Bank 1 - Sensor 2 (Plausibility check)
$21:Monitor-ID $21: Catalytic Converter Monitoring	Catalytic Converter Monitoring
$31:Monitor-ID $31: EGR Control Loop	EGR Control Loop
$81 Monitor-ID $81: Zero Fuel Calibration Monitor	Monitoring of Zero Fuel Calibration, Cylinders 1 - 4
$85 Monitor-ID $85: Boost Pressure Control Loop	Boost Pressure Control Loop
$98 Monitor-ID $98: NOx Absorber	NOx Absorber Efficiency
$A2 Monitor-ID $A2: Mis-Fire Cylinder 1 Data	Mis-Fire Cylinder 1 Data
$A3 Monitor-ID $A3: Mis-Fire Cylinder 2 Data	Mis-Fire Cylinder 2 Data
$A4 Monitor-ID $A4: Mis-Fire Cylinder 3 Data	Mis-Fire Cylinder 3 Data
$A5 Monitor-ID $A5: Mis-Fire Cylinder 4 Data	Mis-Fire Cylinder 4 Data
$B2 Monitor-ID $B2: Particulate Matter Trap Efficiency	Particulate Matter Trap Efficiency