Test Step 3 - Liftgate Open Driver Circuit Open

Fig 1: Testing Liftgate Open Driver Circuit Open

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Disconnect the power liftgate drive unit harness connector.
• Measure the resistance of the liftgate open driver circuit between the PLG C1 connector and the PLG drive unit connector.

Is the resistance less than 5.0 ohms?

No

• Repair the liftgate open driver circuit for an open.
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .

Yes

• Go to Test Step 4 Test Step 4 - Liftgate Close Driver Circuit Open