Test Step 3 - Liftgate Close Driver Circuit Open

Fig 1: Testing Liftgate Close Driver Circuit Open

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Disconnect the power liftgate drive unit connector.
• Measure the resistance of the liftgate close driver circuit between the power liftgate C1 harness connector and the power liftgate drive unit harness connector.

Is the resistance less than 5.0 ohms?

No

• Repair the liftgate close driver circuit for an open.
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .

Yes

• Go to Test Step 4 Test Step 4 - Liftgate Open Driver Circuit Open