Test Step 4 - Liftgate Open Driver Circuit Open

Fig 1: Testing Liftgate Open Driver Circuit Open

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Measure the resistance of the liftgate open driver circuit between the power liftgate C1 harness connector and the power liftgate drive unit harness connector.

Is the resistance less than 5.0 ohms?

No

• Repair the liftgate open driver circuit for an open.
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .

Yes

• Replace the power liftgate module. Refer to POWER LIFTGATE CONTROL MODULE .
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .