Test Step 2 - Binding Liftgate

• Examine the liftgate for proper alignment, worn or binding hinges, weak liftgate prop assembly, or loose/hard weatherstrip for wear or anything that would cause an obstruction to proper operation. Check for the possibility of the liftgate having been overloaded due to ice or heavy snow.
• Raise the liftgate and check the struts for proper operation.
• If necessary manually operate the liftgate of a known good vehicle and notice the effort needed.
• Compare the effort needed on the disabled vehicle.

Were there any mechanical problems found?

Yes

• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .

No

• Go to Test Step 3 Test Step 3 - Liftgate Close Driver Circuit Short to Voltage