Test Step 5 - Liftgate Open Driver Circuit Short to Liftgate Close Driver Circuit
- Disconnect the power liftgate drive unit connector.
- Measure the resistance between the liftgate open driver circuit and the liftgate close driver circuit.
Is the resistance less than 10k ohms?
No
- Replace the power liftgate drive unit. Refer to POWER LIFTGATE DRIVE UNIT .
- Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .
Yes
- Repair the liftgate open driver circuit for a short to the liftgate close driver circuit.
- Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .