Test Step 7 - Liftgate Full Open Switch Sense Circuit Open

Fig 1: Liftgate Full Open Switch Sense Circuit Open

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Measure the resistance of the liftgate full open switch sense circuit between the power liftgate C1 connector and the power liftgate drive unit harness connector.
• Wiggle the wiring power liftgate module harness to check for an intermittent open condition.

Is the resistance less than 5.0 ohms?

No

• Repair the liftgate full open switch sense circuit for an open.
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .

Yes

• Replace the power liftgate module. Refer to POWER LIFTGATE CONTROL MODULE .
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .