Work Procedure

WARNING: This page is about a different variant/trim than selected.

-- Connect the scan tool.

-- Start the engine and let run at idle speed.

-- Select Diagnostic Mode 06: Check test the results of components that are not continuously monitored.

Select the desired Test-ID.

The current minimum and maximum values will be displayed on the scan tool screen.

The following table is a numerical list of all "Test-IDs" that may be selected.

Monitor-ID	Component or System
$01:Monitor-ID $01: Oxygen Sensor Monitor Bank 1 - Sensor 1	Oxygen Sensor Monitor Bank 1 - Sensor 1
$02:Monitor-ID $02: Oxygen Sensor Monitor Bank 1 - Sensor 2	Oxygen Sensor Monitor Bank 1 - Sensor 2
$05:Monitor-ID $05: Oxygen Sensor Monitor Bank 2 - Sensor 1	Oxygen Sensor Monitor Bank 2 - Sensor 1
$06:Monitor-ID $06: Oxygen Sensor Monitor Bank 2 - Sensor 2	Oxygen Sensor Monitor Bank 2 - Sensor 2
$21:Monitor-ID $21: Catalyst Monitor Bank 1)	Catalyst Monitor Bank 1
$22:Monitor-ID $22: Catalyst Monitor Bank 2	Catalyst Monitor Bank 2
$35:Monitor-ID $35: Variable Valve Timing Monitor	Variable Valve Timing Monitor
$3A:Monitor-ID $3A: Fuel Tank EVAP System Leak Test (0.090)	EVAP Monitor (0.90)
$3B:Monitor-ID $3B: EVAP Monitor (0.040)	EVAP Monitor (0.40)
$3C:Monitor-ID $3C: EVAP Monitor (0.020)	EVAP Monitor (0.20)
$3D:Monitor-ID $3D: Tank Vent Valve Function Check	Purge Flow Monitor
$41:Monitor-ID $41: Oxygen Sensor Heater Monitor Bank 1 - Sensor 1	Oxygen Sensor Heater Monitor Bank 1 - Sensor 1
$42:Monitor-ID $42: Oxygen Sensor Heater Monitor Bank 1 - Sensor 2	Oxygen Sensor Heater Monitor Bank 1 - Sensor 2
$45:Monitor-ID $45: Oxygen Sensor Heater Monitor Bank 2 - Sensor 1	Oxygen Sensor Heater Monitor Bank 2 - Sensor 1
$46:Monitor-ID $46: Oxygen Sensor Heater Monitor Bank 2 - Sensor 2	Oxygen Sensor Heater Monitor Bank 2 - Sensor 2
$A2:Monitor-ID $A2: Misfire Cylinder 1 Data	Misfire Cylinder 1 Data
$A3:Monitor-ID $A3: Misfire Cylinder 2 Data	Misfire Cylinder 2 Data
$A4:Monitor-ID $A4: Misfire Cylinder 3 Data	Misfire Cylinder 3 Data
$A5:Monitor-ID $A5: Misfire Cylinder 4 Data	Misfire Cylinder 4 Data
$A6:Monitor-ID $A6: Misfire Cylinder 5 Data	Misfire Cylinder 5 Data
$A7:Monitor-ID $A7: Misfire Cylinder 6 Data	Misfire Cylinder 6 Data

-- Switch the ignition OFF.