Instrument Cluster: Notes

WARNING: This page is about a different car, the 2011 Volkswagen CC, 2010 Volkswagen CC, and 2009 Volkswagen CC. However, it is still accessible from the selected car via links, so may be relevant.

DTC recognition and display, refer to DTC RECOGNITION AND DISPLAY .

Replacing the instrument cluster, refer to REPLACING THE INSTRUMENT CLUSTER .

Coding the instrument cluster, refer to CODING THE INSTRUMENT CLUSTER .

Instrument cluster output diagnostic test mode, refer to INSTRUMENT CLUSTER OUTPUT DIAGNOSTIC TEST MODE .

Reset the Service Interval Display, refer to SERVICE INTERVAL DISPLAY, RESETTING .

NOTE:

Instrument cluster component functions can be checked using On Board Diagnostic (OBD) program function "Output Diagnostic Test Mode (DTM)". Refer to INSTRUMENT CLUSTER OUTPUT DIAGNOSTIC TEST MODE .

Additional information:

Refer to the Owner's Manual.

Refer to Maintenance, Diagnosis .

The following components are integrated in the instrument cluster:

Instrument cluster control module -J285-
Tachometer -G5-
Coolant temperature gauge -G3-
Oil level thermal sensor -G266-
Speedometer -G21-
Outside air temperature sensor -G17-
Fuel level sensor 2 -G169-
Fuel gauge -G1-
Fuel level sensor -G-
Indicator lamps, refer to INSTRUMENT CLUSTER OVERVIEW .

All warning and indicator lamps are equipped with light-emitting diodes (LEDs) which cannot be serviced or replaced separately. In the event of malfunctions, the complete instrument cluster must be replaced. Refer to INSTRUMENT CLUSTER .