Automatic Transmission Fluid Level, Checking: Adding
-- Install the quick release coupling from the adapter for oil filling VAS 6262 A to the transmission pan hand tight.
-- Shake the fluid bottle before opening.
-- Connect the adapter for oil filling VAS 6262 A to the fluid container. Be sure to read the instructions. Refer to Note the following information .
-- Fill with 1 liter of ATF.
-- Connect the oil filler adapter VAS 6262 A to the quick release coupling and check the fluid.
If the ATF leaks out of the plug hole:
The ATF does not need to be topped off.
-- Allow the ATF to drain until it drips.
-- Reinstall and tighten the plug, with a new seal, to 27 Nm. The ATF level checking is now completed.
If no ATF leaks out of the plug hole:
-- Add another liter of fluid. Refer to Adding .
Too little or too much ATF will impair the transmission.