Anti-Theft Coding, Deactivating

-- Turn on the RNS.

"SAFE" appears in the display for approximately 10 seconds, after that "1000" appears.

-- Enter the correct radio code using the buttons on the radio.

-- Press the input screen to confirm in the entry.

The RNS (Radio Navigation System) is enabled and ready for operation.

Use the correction screen to erase an incorrect code.

It is possible to enter the radio code again if it was entered incorrectly. If radio code is entered incorrectly twice, then the RNS (Radio Navigation System) is locked for an hour. Leave the RNS and ignition on. The process can be repeated again after an hour. Note: Always two attempts, after that the RNS (Radio Navigation System) will lock up for one hour.