Service Interval Display, Recoding

Coding from Flexible to Fixed Intervals

-- Connect the Vehicle Diagnostic Tester Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .

-- Switch on the ignition.

-- Touch button/field on screen: "Guided Functions".

-- Select in succession:

• Brand
• Type
• Model year
• Engine code

-- Confirm vehicle identification.

If the vehicle identification procedure was performed correctly, press >  button for confirmation.

-- Select in succession:

• "Instrument cluster" -ARROW-.
  Fig 1: Diagnosis System Display: 17 - Instrument Panel Insert

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• "Adapt service interval extension".

-- Perform the Adaptation following the "Guided Functions" prompts.

End Adaptation

Indicated on display:

-- Press the Go To  button -arrow- on the display.

Indicated on display:

-- Press the End  -arrow- button on the screen.

-- Press the Exit  button in the exit menu.

-- Turn off the ignition and disconnect the diagnostic connector.

Change in the Km-maximum values for oil change service (fixed) during the delivery inspection.

ODIS Service
-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .
-- Switch on the ignition.
-- Select the VIN.
-- Select "Work with guided fault finding"
-- Select the "control module"
-- Select "Instrument Cluster"
-- Select "identify control module".
-- Select "Guided Functions".
-- Select "Oil change service (fixed)"
-- Follow the "Guided Functions" instructions.
-- Reset "-1- Oil change service (fixed)".
-- Follow the "Guided Functions" instructions.
The maximum Km values are displayed in the Vehicle Diagnostic Tester.
-- Select "no".
-- Select the country specific maximum values until the next oil change service.
-- Adapting according to "Guided Functions".